Mô tả

Alphacool is an internationally renowned company in the field of water cooling solutions for industry and end customers, which constantly develops new products and improvements that serve to optimize cooling performance and improve the appearance of home and company computers and servers.

Uncompromising in the choice of material
As usual, Alphacool also uses pure copper for the NexXxoS V.2 radiators. The antechambers, the water channels and the cooling fins are made of copper and are a unique selling point worldwide. No other manufacturer relies on pure copper for all of these components. As a result, the Alphacool radiators have been among the most popular and best on the market for many years, which provides the perfect basis for any water cooling system.

Full cooling performance
In order to maximize the performance of a radiator, Alphacool digs deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. In addition, there is the special fin density. Alphacool is one of the oldest water cooling companies and has done countless lab tests. The result is a fin spacing of 15 FPI. This impedes the airflow relatively slightly, since the air can slide through without high pressure. However, the cooling performance does not suffer as a result, on the contrary. In order to use the airflow optimally, all cooling fins have small flaps. These are tiny wings that direct airflow in the desired direction. The radiators are barely 1 mm high,

New generation of screw
plugs All NexXxoS V.2 radiators use the new patented screw plugs from Alphacool. Anyone who has mounted a radiator on the front or in the ceiling of a case knows that protruding locking screws mean that the radiator cannot be placed flush. With the new patented screw plugs, Alphacool offers an excellent solution. They are completely sunk into the radiator and are flush with its surface. As a result, nothing stands in the way of clean assembly. Of course, the radiators also look much more elegant with the new locking screws.

Plenty of connection
options All variants of the NexXxoS V.2 XT45 radiators have two connection options for IN and OUT on one side. On the opposite side, the NexXxoS V.2 XT45 radiators now also have a fill or vent port. Of course, this connection can also be used to drain the water circuit.

The right size for every application
The NexXxoS V.2 radiators are available in all common sizes. From the compact 120 mm ST30 radiator to the 480 mm radiator for those who can’t get enough cooling capacity. Friends of 140 mm fans don’t miss out either. Here, too, Alphacool covers all sizes from 140 mm to the huge 420 mm ST30 radiators. And to take it all to the extreme, there are ST30 and XT45 variants for all radiators. These differ quite simply by the thickness. ST30 stands for a thickness of 30 mm, XT45 for a thickness of 45 mm.

Safety first
The NexXxoS V.2, like the previous NexXxoS radiators, offer special protection that prevents fan or assembly screws from being screwed in too deeply. Protective plates were placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the underlying cooling fins and water channels.

The king is dead, long live the king! Anyone who was happy with the previous NexXxoS radiators will appreciate the many small advantages of the NexXxoS V.2 radiators. Because only the details make a good radiator a perfect partner for your own water cooling.

ATTENTION: The NexXxoS V.2 radiators are only compatible with connections with a maximum thread length of 5 mm.

Technical data:
L x W x H: 394.5 x 124 x 45.5 mm
Weight: 1110 g
Material cooling fins: copper
Material antechambers: copper
Material cooling channels: copper
Material outer housing: steel
FPI: 15
Connections: 5 x G1/4″ Mounting
options: 24 x M3 thread
Fan size: 120 mm
Fan slots: 3 on one side / 6 on both sides
Fan thread: M3
Pressure tested: 1.5 bar