Mô tả

As a result, the German Wakü specialist continues to claim the crown among the CPU water chillers, which is due not least to the usual diligence of experienced engineers who have set new standards in the cooling performance through various analyzes, optimization procedures and tests.

The aquacomputer cuplex kryos NEXT CPU water cooler with VISION:

CPU water cooler from aquacomputer
Cooling base with extremely fine microstructure (under 200 μm)
Copper housing + copper base
VISION module with OLED display
Two G1 / 4-inch connectors available
Compatible with AMD sockets of the AM4 series
Thermal Grizzly Kryonaut Thermal Compound Containing (0.5 grams)
Optimized CPU water cooler with high performance & stylish design

The aquacomputer cuplex kryos NEXT surpasses the unprecedented cooling performance of the already successful predecessor and thus represents a new milestone in the development of CPU water chillers. The cooler floor is equipped with an extremely fine microstructure with a structural width of less than 200 μm. For optimum distribution of the coolant, a flat nozzle is integrated into the housing, as a result of which the coolant flows centrally onto the microstructure and is discharged from there in two directions.

The cuplex kryos NEXT is available in various versions, which is the copper version, which has a copper housing as well as a copper base and whose outstanding appearance is only interrupted by the stainless steel plates of the mounting system.

Including VISION module with OLED display & powerful electronics

The special feature of this model of the cuplex kryos NEXT cooler is the state-of-the-art VISION technology, which is based on a temperature sensor for the cooling medium as well as its own microprocessor, to control the OLED graphic display, integrated into the cooler housing, with a resolution of 128 x 64 pixels To display useful information there.

Thus, the water temperature measurement is directly integrated in the cooler and can be used in combination with the aquasuite software in addition to various further hardware data such as, for example, Processor load, can be displayed directly in the freely configurable display. In addition to the USB interface to the PC and the aquabus interface for exchanging data with an aquaero 5 or 6, the connection option is for a flow sensor or alternatively alarm output. However, it should be noted that a maximum of two connecting cables can be routed into the radiator and the user must therefore decide which components he would like to connect.

Simple mounting – ideal for the AMD socket AM4

The mounting system of the cuplex kryos NEXT is very high-quality processed and allows an uncomplicated installation on various AMD pedestals of the AM4 series. Two massive stainless steel plates with a material thickness of 2.5 millimeters and a total of four pressed nickel-plated spring cups produce a tidy and elegant look in the installed state. This is achieved mainly by the low overall height as well as the knurled screws and springs hidden in the spring cups, which are intended for the actual fastening of the cooler on the mainboard. The thumbscrews can either be mounted comfortably by hand or by means of a hexagon socket wrench. Since the motherboard processor base already has a backplate, this variant of the cuplex kryos NEXT CPU water cooler does not contain an additional backplate.

Perfectly combined with Thermal Grizzly Kryonaut thermal grease

For optimal performance, the delivery of each cuplex kryos NEXT CPU water chiller is also a syringe with 0.5 grams of the highly heat-conductive thermal Grizzly Kryonaut thermal grease, which should be sufficient for about five radiator coolers. Thanks to the plastic spatula and the low viscosity of the thermal paste, it is also very easy to distribute between CPU and water cooler.

Note: This product is supplied without the necessary connections to allow the buyer the greatest possible freedom when assembling water cooling.

Technical details:

Dimensions (AM4): 111 x 75 x 22 mm (L x W x H)
Material: copper (housing), copper (cooler floor), stainless steel (mounting frames)
Connections: 2x G1 / 4 inch
Thread spacing: 24 mm (center hole)
Compatibility: AMD socket AM4
Thermal grease: 0.5 gram Thermal Grizzly Kryonaut
Delivery:
1x aqua computer cuplex kryos NEXT radiator (mounted)
1x mounting kit (screws, springs, etc.)

1x Thermal Grizzly Kryonaut thermal grease (0.5 grams in syringe)
1x plastic spatula
1x assembly instructions